I’d sincerely recommend everyone to read his manifesto and think about it a little bit.
Also, we’re still wondering if the McSnitch is getting their reward money. The last I heard they were thinking about withholding it.
And that would be such a great propaganda point to show that US law enforcement doesn’t regard the rest of us as full persons / citizens and will cheat us out of our due even when we cooperate. So yeah, no-one sees nothing. Ever. You’re a collaborator if you do.
Zero Witnesses.
He’ll get a jersey from the local police department.
Are we fucking with sofas again?
This is one of my dystopian thriller elements: If the police can’t find the culprit of a high-profile crime, then they find someone, plant an orgy of evidence and railroad him into capital punishment or life in a supermax. Just to show that the long arm of the law always wins.
Doing a for-real investigation and just disappearing / killing off any likely suspects is optional, depending on how vengeful the elites feel about it.
You would think the police would pick someone who wasn’t so photogenic.
Here’s what I might do if I couldn’t catch a murderer but wanted to make an example anyway, and I had access to AI art that was very good at getting approximately accurate images of people…
I still don’t think he’s the same guy who shot the CEO, it’s clearly for me a different person in the photos…
However, at this point this changes nothing of what’s going to happen, anyone caught for this would be facing the same charges. Let’s hope the jury feels as we all do and lets him walk
They planned evidence because they used illegal means to identify him
That would be a terrible idea. If they identified him using illegal means, any evidence found as a result would be inadmissible. It’s fruit of the poisoned tree.
It doesn’t matter. One of the world’s rulers was gunned down so they are bringing the book down on him. Anything goes.
Still more plausible than the cops saying “well fuck it he’s gone” and finding a lookalike to take the fall like a day after the shooting.
Grow unibrow and beard
Luigi is innocent. A witness across the street stated they didn’t hear gunshots at the time.
Eric’s head just did that.
I was suspicious at first too, but now as weird as the whole scenario looks my skepticism has weakened (e.g. people say he’s been missing from work during the shooting, the unibrow may have been simply visually deformed by the shitty camera, etc.).
But you know what, I think it’s better to stop trying to be smarter than what is reasonably possible, and at the very least wait and see what he and his lawyer will have to say in the court. E.g. if the evidence was fabricated, they will certainly try to argue that. Not everything about the story will clear up, but some things can, and I say it’s better to wait it out with a bit of patience.
Besides, what if it really wasn’t Luigi and we’ve all been duped? How will the fanboys and fangirls lusting after him feel? What will the smart businessmen do with their leftover Saint Luigi candles?
4chan op has a tenuous grasp of how time and pictures work.
Important to note: 3D PRINTED FIREARMS DO NOT BREAK WITH A FEW USES
Firsthand knowledge.
200-250 rounds and still going strong, inspected before and after firing every time
No damage so far.
Beyond that point, I agree with everything posted.
Yeah, the early 3D printed guns were garbage, but modern ones are much more durable. Changes in design have allowed for the use of off-the-shelf parts for the most important moving pieces, which means you have the durability of those off-the-shelf parts instead. The 3D print is basically just holding the machined parts together.
it’s not like homemade guns are a new thing, it’s just that now we can make them not look like pipe guns from fallout 4
Yeah but people don’t consider printing a handle to be a “3d printed gun” unless you’re trying to ban their existence entirely.
Yeah 3d printed gun is such a misnomer for most of the “ghost guns”, the gun he had was just the printed frame. That section of the 3d printing community isn’t really my scene but that seems to be what I’ve seen for all the printed guns, lower/frame with barrel and trigger assembly being metal pieces. I think years ago I saw a modern reinterpreting of the WW2 Liberator that was done in all plastic but that’s obviously designed to shoot only once.
I’m sure you know more about the scene than I do and can correct or verify my knowledge.
The ones I have use 3d printed frames, the fire control group and barrels are metal with 3d printed pieces for making the rifling.
All the parts that take repeated heavy abuse are reinforced with extra thickness or different infil, but by weight I’d say it’s about 50/50 metal/plastic.
The 3d printed lowers are quite basic, and since they aren’t designed to take a ton of stress anyway, it’s not really hard to find a decent design.
All my parts are printed in pla+, and I do minimal work afterwards to make things perfect, only what is necessary for the mechanical parts to cycle properly.
I actually haven’t been keeping up the last few years, I wouldn’t be surprised if there are even better methods than the ones I’ve used.
To add on to what you said, only the lower recievers for most guns have to be registered. Someone could hypothetically get every other upper part for a pistol or rifle delivered directly to their door or PO box with no questions asked, and then just hypothetically 3d print the lower reciever.
I think that highly depends on your knowledge about 3D printing an what materials you use.
Most 3d printed guns are constructed very similarly to “real” commercially available (in burgerland) guns that use a polymer construction. The plastic is taking very little of the force, they use metal inserts and rails that the mechanical parts connect to. This distributes the load a lot. I haven’t printed any yet, mostly because you basically need to buy a whole gun to build one, but they aren’t magic or anything and you could do the same thing with woodworking tools by hand if you had a lot of patience.
The most reliable one I have uses an AR style fire control group, and large metal pieces for the bolt, and pre-hardened hydraulic tubing for the barrel.
There’s plenty of metal in it, all held together via 3d printed parts and frame
The only things I needed to buy that I would consider “from a firearm” or “from a gun store” would be the fire control group. Everything else was bought from McMaster Carr or local hardware stores.
Spot on with the woodworking. I’ve made a couple stocks for my grandfather’s old broken long rifles. It’s just more time consuming. (also my 3d printer isn’t that long)
I was mostly thinking of the handgun builds I’ve seen with hand made slide rails but the rest is just a Glock(or whatever else base gun) parts kit for everything else.
Ah, that makes sense.
I was coming here to say this, I have an (unfinished) semi-auto 9mm carbine and its only part from a real gun is a barrel from a Glock because I didn’t feel like making my own XD
Based O’Brien would engineer a thousand-round 3D printed gun while the federation’s ATF just weeps in a corner
500 cigarettes
That’s awesome and also kind of scary.
There’s a whole community for it! There’s a YouTube channel called “Print, Shoot, Repeat” that actually talks about the gun police showed
Cool! I’m not into firearms gives them some other appeal. I’m gonna check that out.
What if I told you about “80% receivers” and parts kits that have been in use for decades by hobbyists?
- Individuals who make their own firearms may use a 3D printing process or any other process, as long as the firearm is “detectable” as defined in the Gun Control Act. You do not have to add a serial number or register the [privately made firearm] if you are not engaged in the business of making firearms for livelihood or profit.
“80% receivers” are a weird line in the sand to pick between “random hunk of metal/plastic” and “yeah that’s a gun bro” but words have meaning that (still) have to be defined in law, and you can build a 100%* factory looking gun with zero 3D printed parts and no serial number.
*Depends on your skill with tools and machinery ofc, but can be done with a hand drill and a basic file with enough patience
Gun nut
His name was Robert Paulson
I… Do not know what this means
More likely he had no real semblance of getting away with it and just happened to escape due to the incompetence of the NYPD.
People who typically go through these plans are not the most mentally stable, he was probably expecting to be caught so he wrote his manifesto beforehand and thought he’d try to see how far he could get.
Most of all, he probably did not expect the authorities fail to ID him, which is also why he made it for so long.
Even the Mcdonalds employee might have reported him for other reasons like loitering or general sketchiness and not because they thought he was the shooter.
Still I think it’s funny how he inadvertently proved the ease of crime with pretty basic rules. Any sort of organized crime, especially one off jobs could probably do it even more discretely and get away with it.
The news interviewed the employee, and apparently he wasn’t aware that was actually the real luigi right there. He was trying to waste the police’s time on a lookalike
Except that manifesto sounds fake AF bootlicking cops in the first sentence? he more than likely dead man switched the one on pepmangione dot com slash manifesto
Have you read up on him at all? Luigi came from a wealthy heavily Republican family and was just starting to question right-wing ideology. Having respect for the feds is absolutely in line with the person described in this article.
You sound like a 9/11 crackpot.
You mean the people who believe the official conspiracy story, sold to us by the Cheney gang? You know, the one that literally defies the laws of physics?
Its no use, he probably thinks wtc building number seven collapsed demolition style because the shockwave from the planes hitting the twin towers caused a ripple effect and a butferfly flapped its wings in Indonesia so there was definitely no fowl play on behalf of our extremely trustworthy societal institutions “. 🥴😴🤡
I have said it once and I will say it again: I am genuinely shocked at just how many people, especially on Lemmy, are just accepting that Luigi is the real shooter. I haven’t believed it for one minute and the only thing that will make me believe it is audio proof of Luigi confessing while not under duress.
Why would you think the feds want the wrong guy? Because what they want the actual killer to be roaming free.
What happens if the real killer does another hit in a few weeks? The Feds just be like erm nah this is a copycat we will get him too.
Occam’s razor.
Also this post is filled with misinformation itself. There are plenty of 3D printed gun demos on YouTube where the guns don’t explode.
You don’t seriously think that the feds are trying to keep America safe, do you? The feds and NYPD all need to have someone in jail so they can claim that they did a good job. They want to brag about how accomplished they are.
There is no duty to protect and serve. The police do not have to protect you, and they don’t on a regular basis. I know you might have heard that growing up, but it’s just not true.
If the “real” shooter hits again, that illusion SHATTERS. It’s a terrible play.
Also as far as I’m aware it wasn’t a fully 3d printed gun, rather a 3d printed lower for a Glock. The lower doesn’t have to handle anywhere near the levels of pressure that the upper does, so is unlikely to break when firing.
Personally, it seems more likely to me that he never expected to get away with it for as long as he did, didn’t really have a plan beyond getting out of NYC, and went to that McDonald’s to get caught.
Maybe I’m wrong, that’s completely possible. But… I dunno… a lot of eyes are on this case. It would be very very dumb of the cops to manufacture a suspect with all the attention on this. Maybe they are that dumb…
Never underestimate how incompetent the American police are
You’re shocked eh.
This attitude sounds very trumpy
All you know is what you heard in news reports. There is no incentive for them to arrest the wrong guy, and we haven’t heard all the evidence
Installing security systems was part of my job, and sorry, but a lot of criminals are idiots. They just assume they’re going to get away with it. Or they figure they’re going to get caught
We had one where some fat guy tried to climb a gate but it broke so he went through it. Then he took his hoodie off as he was stealing a camera.
Had another where the guy ran a fake school as a scam. When they investigated him, they discovered he had all of the computers, but none of them were set up. But really, the suspicious part was the Ferrari he owned
Had another guy who was the world’s biggest asshole. He got busted for distributing drugs.
Then there is Trump who brags about his crimes and then pretends like he’s being set up
There is no incentive for them to arrest the wrong guy…
No, yep, you’re right, absolutely zero incentive. Not like there’d be a bunch of rich and powerful CEOs breathing down their neck to catch the CEO killer or anything.
You think all the random CEO’s right now are calling the police station telling them they need to catch the killer?
Are you serious? 😂
That’s not how these things work
But you make up whatever story supports your conspiracy theory.
It’s possible it’s not the correct person. But it’s more likely you guys read a few news articles and the police have a lot more information than what you have.
That’s not how these things work
You’re right, it’s not. Do you really expect a CEO to bother himself with a plebian beat cop? No, he’d call his good friend the mayor, who would call the chief of police, who would put pressure on his subordinates.
This isn’t exactly rocket science? And if you don’t believe the above is possible, then you’re one of the targets of this grift.
Do you think this wasn’t political, and isn’t getting a political response? Are you serious?
What would be the message if someone managed to off a CEO in broadband daylight and get away with it? Does it matter to them if they have the right person or not, or does just getting a plausibly similar person serve just the same goal with any political message in mind.
We seriously can’t know whether it is or isn’t the right guy, so it’s genuinely doesn’t matter if it is or not.
Goddamn I’m tired of people pretending like politics doest exist and malicious people aren’t a thing. Yeah no the world isnt ruled but lizards but conspiracies are every much a real thing and you just registering the word directly as “bullshit” is so dystopian.
If you me and a third guy plan a crime, that’s a conspiracy.
Of course there’s incentive to arrest the wrong guy, because there’s incentive to arrest anybody at all, to avoid looking incompetent. This is policing 101. Round up the usual suspects and if you don’t have any usual suspects, round up somebody.
A minor correction, 3D printed guns are fairly reliable nowadays when made in a way such that all pressure bearing parts are made with metal/factory made regular parts
Yeah was gonna comment this. There are totally functional 9mm machine pistols with everything made from printed and standard hardware store parts.
some rifles too, saw a YouTube video of one and it was pretty cool.
Yeah chiming in here to agree, 3D printed guns are now nearly identical in performance to other polymer based guns (like Glocks for instance).
they don’t degrade after being fired?
All guns degrade after being fired, but modern production firearms are just plastic wrapped around metal tubes. 3D printed guns have always worked on the same principle but it takes time to develop them to the same safety standards.
Not if they’re made correctly, with good materials like nylon-cf, correct print settings, and good post processing. It’s a process that takes a day or two and requires a small amount knowledge and skill.
A handgun made like that will function for thousands of rounds.
thanks, I had no idea.
I think it was also clarified that the gun was a Glock with 3d printed lower, which is basically a normal Glock with different plastic.
sauce? i’m seeing that he just got a purely-
ghost(edit: homemade) gunThat functionally is a ghost gun in the US because only the lower is registered. Everything else is off the shelf, theoretically untraceable bits.
yes, and i’m saying that all the sources I see say it was completely homemade
Oh, rog! I misread that. I’ve seen a bunch of mixed BS, so hard to say.
The lower / reciever / frame is the part of a semi auto handgun that has the serial number, as this is the part that is legally considered ‘the firearm’.
If you 3d print the lower, you can just buy every other part, often without a background check, in many instances without any ID at all, and assemble the gun around your 3d printed lower.
What makes something a ghost gun is that it does not have a serial number that can be tied back to a purchaser, who would have had to be ID’d / NICS checked or w/e.
What makes it a ghost gun is not that it is entirely made of plastic that wouldn’t show up on a xray or something, its that it is untraceable to a point of origin if you have the gun and nothing else to go on.
The other way people do this is by destroying the etched in serial number.
…
I haven’t actually heard it confirmed that Luigi only had 3d printed the lower, though for a normal person, that would probably be the easiest way to assemble a ghost gun.
But, he’s an engineering graduate.
Its possible he did ‘3d print’ many other components by using metal machining tools.
as i’ve said elsewhere, i meant purely homemade, not ghost.
and you don’t even need to be an engineering graduate to homemake the metal parts of a gun
Well, you said ghost gun.
A homemade gun can be, but is not necessarily a ghost gun.
You can purchase a serial stamped, legal, traceable lower reciever/frame, and then purchase all the rest of the components of a gun, and assemble the whole gun yourself.
This is fairly common amongst experienced gun enthusiasts who prefer specific brands or designs for various parts, and like to do their own custom builds.
The result is a totally legal, non ghost, homemade gun.
…
Long Explanation of all the metal FGC9 parts an average person cannot make at home, period, or metal parts you can make at home but would need to have a CNC machine and significant machine shop experience.
The FGC 9 that you linked an article about… yes, it does feature more 3d printed parts which are typically made of metal… but it still requires you to buy many various metal parts.
https://www.hickoryhillarms.com/post/building-the-fgc-9
So even with this thing, here’s all the parts that are not 3d printed plastic, that you would be very difficult even for an engineering graduate to create on their own unless they had access to their own industial machining tool manufactory:
Fire Control / Trigger Mechanism; Springs Disconnector Pin
Hammer Hammer Spring
Grip Screw Grip Screw Lock Washer
Feed Ramp Screw
Mag Catch Spring
Primary Buffer Spring Secondary Buffer Spring
Brace Screw
Ejector Screw
Alan Key / Wrench
Firing Pin Retaining Screw Firing Pin Retaining Screw Nut
Reciever Screw
Firing Pin Firing Pin Screw
… Phew. Ok, so, sure these parts are not that difficult to purchase, why bother listing them all?
Because you said you don’t need to be an engineering graduate to make the metal parts of a gun.
That’s not true for all the above parts.
You’d need to have an entire manufactory to make these things out of the material required, at the quality required.
…
The following parts actually could be CNC’d by someone with moderate experience with a CNC machine, and a CNC machine at home, but they’re not made of 3d printed plastic:
Bolt
Barrel (Non Threaded, thus significantly innacurate at range)
Now, if you are even more experienced with machining, you may be able to produce a threaded barrel…
… But at that point we are talking about an experienced machinist with pretty uncommon equipment, which itself can be traced.
Either way, you can’t make the bolt or barrel out of plastic for the FGC 9, and while yes, a novice machinist could learn how to machine one at home, the vast majority of people who build FGC 9s purchase the bolt and barrel from someone who runs a small, often psuedo legal business of making them.
You just 3d print the lower reciever, most modern handguns use injection molded plastic for this part, and a good 3d printer (and operator) can get a pretty decent result.
But its not just the ‘pressure bearing’ parts that cannot easily be 3d printed.
Almost everything else still has to be either purchased or very, very carefully assembled by hand with skill and machining tools.
Here’s a Glock 40:
Its basically a pretty bad idea (impossible with springs) to try to replace any of the metal parts with 3d printed plastic, many more parts than the barrel and slide are made of metal, and many of those parts could easily fail, even after mag worth of ammo or less, and completely brick the weapon.
People who make or sell 3d printed weapons still have to include a parts kit (or shopping list) with the stuff you can’t 3d print… with the exception of weapons that fire basically .22 or smaller cartidges, and those ones that actually are all 3d printed plastic are not going to survive very many shots.
What does everyone think they do with all their biometric and Face ID data? Throw a shitty algorithm against this data cross referencing a pic from a grainy security feed and in this post truth era, 100% of crimes are now solvable.
