Are you unpacking them directly on your NAS?
Because chances are, that if you use a Synology and map the drive or use the GUI, that the data keeps getting transferred between your PC and the NAS. This is a very slow process, especially if you connect by WiFi.
You’re right, context is important here.
The image came from a twitter post. „Heat index“ means basically „Feels like“.
https://www.timeanddate.com/weather/iran/bandar-abbas/historic?hd=20230808
Doesn’t mean it was fucking hot tho.
That is correct, this is the standard procedure to dry PCBAs.
You lost your pad. This usually happens if you have old PCBs which were exposed to some air humidity over time. The pad heats up and the moisture evaporates between the layers, separating the pad and the PCB base material. More heat increases the likelihood of that happening.
That part is unsolderable now. You need to connect at a different place and reconnect any interrupted traces or glue the pad back to the board, if you can.
Game controllers in general are very hard to repair since they contain large copper layers to withstand forces from the controls. It’s very common to loose pads or lift THT holes.
That said, most often nothing is ever beyond repair. It’s usually just a matter of skills and tools which are available.
It’s crazy how the admins try to cover this up.
https://old.reddit.com/r/place/comments/154wiwk/admins_clearly_messing_with_things/
Later I just saw the whole SPEZ disappear in a grey/black pattern all at once. It’s happening right now.
Added own video: https://streamable.com/n3g4a6
Here, a higher res version https://youtu.be/E2a_oRBXTwQ
It’s written in the article…
A friend saw that she was online and informed the authorities. With Nintendo’s cooperation, the FBI culled the Switch’s IP address, uncovered her location, and moved in to arrest Roberts.
In general, Voltage and resistance determine amperage, that’s right.
Central aircon is pretty standard for most large buildings but individual aircon systems for private housing is rare, mainly because it is only very hot for a short period of time.
Around 2005 Europeans used SMS quite often while the US didn’t seem to use it at all. Then a few years later it was all done by WhatsApp since it was more or less for free. And now we’re having blue/green bubble discussions.
Have we gone full circle and are using actual SMS again?
The lines from an USB wire are very thin. Any tip should do.
Is the solder melting and sticking to the tip? Can you pre-tin the wires or are they coated? Can you upload a picture of what you are trying to do?
What temperature are you using?
You’re right of course. Two more questions if you don’t mind:
At the moment you’re also mixing up your + input. 10V AC + 5V DC result in 7.5V input in your sim.
Papilio machaon (Old World swallowtail)
So what should happen if you replace the 1k in the inverting loop by 0 Ohm is, you should get a 5V square wave.
Is that correct?
Exiting! It has been some time for me too, let me know how you solved the problem at the end.
In my opinion an oscillator always produces an AC sine wave. There is usually no need for a DC overlapped oscillator signal. The DC supply of an oscillator produces a AC sine wave relative to GND.
Where exactly did you measure a DC sine wave, relative to what, and what do you mean by “AC removes a DC component”?
Supply the OpAmp with +/-12V or +5/0V and use a non inverting Summing OpAmp Circuit to get your 0-5V signal. V1 is 5V, V2 your input.
Time of document: 10:45. Report to stewards by 11:15.
That’s an efficient process.
Not by default. It remembers the MAC for each specific network. This is because sometimes you want to have specific device on the same IP all the time. The DHCP decides this via the MAC.
If you want it truly randomised every time you need to turn on non persistent MAC randomisation in the developer option.