Thankfully both boards support bios flashback so as long as OP prepares a USB drive ahead of time, they can update bios without a CPU.

Also agreed on the X*70s. Besides the OCing stuff you’ll see more pcie lanes but it doesn’t sound like that’s much of a concern for OP. Personally, with the small price difference and similar capabilities, I’d go with the one I thought looked better lol. The average user probably won’t notice any difference between the two.

Option 1 would be the better way to go first imo. The 9400 was an ok CPU but those 9th gens are really starting to show their age. You’re also holding it back by only using a single stick of ram. Your RX580 can hold out a bit longer with a better CPU and faster memory in dual channel, but if you upgrade the GPU first you’ll still be seeing the same performance issues. If you do go with option 1, make sure you have the proper mounting kit for your heatsink. AM5 is very different from 1151.

I’m in that boat as well. I backed around a decade ago and while I haven’t made it to the chairman’s club, I’m still embarrassed by how much I’ve put into this dumpster fire due to the fomo and ever looming price increases on stuff. I basically don’t play anymore, but I follow the patch notes and occasionally drop into the testing chat or subreddit and see what the latest is.

The main arguments I see from people are that it’s in alpha and that x or y was never promised (or wasn’t promised by a certain time) and that’s all bullshit. Yes, the game is in active development. Yes, bugs are going to be created and slip through testing. Yes, scope changes and things need to be reworked. Yet year after year after year CIG has shown how incapable they are at squashing bugs properly while still adding more features which just compounds onto the underlying problems. As for the feature promises, they make a big deal about x or y coming around a certain time. Is it a promise? No, that would be insane, but they feed the community what they want to hear with targets, build that hype and take in money, then last minute it’s oh, we’ve gotta push it back, BUT IT’S COMING DON’T WORRY!! Really, what a surprise you guys ran into issues with yet another thing and had to push your projections out yet again. Every year it’s the same cycle. How long has 4.0 been on the horizon? I also found it a bit insulting when Jared went on ISC (IIRC) not too long ago and was like “we never promised anything, that’s the communities fault for getting too hyped.” Like broooo, you guys intentionally drive the hype and then blame us when we get excited??

The project has been poorly managed for years and I don’t expect it to get better. I truly hope they succeed because it really has the potential to be something special and ground breaking (at least as far are the server meshing tech goes) but I’m done supporting them in any way. I’ve handed over way too much money. I’ve wasted countless hours trying to work around the bugs that plague almost every single patch. And all the times I tried to defend them online just made me look like a clown as they continued to pump buggy builds out one after another. Eventually, you just can’t find a reason to stand up for them because you feel like you’re enabling bad behavior. Unfortunately, the wonder and awe the game used to inspire is long gone for me. It’s been a really disappointing ride watching the one game I really wanted get mismanaged the way that it has.

Winter in Australia is June-August, so that December temp is their summer record.

Z-library was a massive pirate repository for ebooks.

It is not compatible with Linux and IIRC the dev does not know how to port it.

I’ve seen a bunch of people recommend this and I’ve played around with it a bit since they initially added frame gen to Lossless Scaling. It never feels smooth. There’s always some stutter/jitter in the frames that makes it feel terrible, even when it’s “100+ fps”. Definitely feels worse than a native 60. Also worse than AMDs fluid motion frames option which does feel and look smoother. I leave it installed and come back from time to time to see if it’s improved but it’s just not something I’ve found to be enjoyable or an improvement to my gaming experience.

Like the others said, double check your connections. It’s easy to accidentally not plug something in all the way. Also, an extra preinstalled standoff wouldn’t be out of the question and I have had that happen, would be worth checking out as well. You didn’t mention what power supply you are using. New/used? Older used? Can you test the power supply on another computer to help rule that out?

Ryzen 1700 doesn’t have integrated graphics.

No problem :)

Using reader mode usually makes these accessible or if you like saving recipes, the app Paprika works well on many sites. Even ones that won’t automate the download (like this particular one) make it easy to copy by section into the app.

French Onion Macaroni and Cheese Recipe By Ali Slagle

Total Time: 1 hour

This outrageously good macaroni and cheese fuses two classic comfort foods into one dish. Caramelizing onions can be a time-consuming affair, but here, the process is sped up by using high heat and and a little water to prevent scorching. The sauce is made with a combination of Gruyère, to remind you of French onion soup, and white Cheddar, to make it melty and smooth. Instead of topping the dish with a dusting of diminutive bread crumbs, it’s dotted with Gruyère toasts that become melty and crisp after a few minutes under the broiler. (You’ll want to slide a sheet pan underneath before baking, in case some of the sauce bubbles over.) This is over-the-top richness at its best.

Learn: How to Make Mac and Cheese Ingredients

Yield:6 to 8 servings

Kosher salt
4 tablespoons unsalted butter, plus more for greasing the pan
2 pounds yellow or Vidalia onions, peeled, halved and thinly sliced
5 sprigs fresh thyme, plus more thyme leaves for garnish
1 fresh or dried bay leaf (optional)
Black pepper
1 pound cavatappi or elbow pasta
1 baguette, cut into ½-inch slices
1 garlic clove
2 tablespoons sherry vinegar, red wine vinegar or white wine vinegar
3 tablespoons all-purpose flour
4 cups whole milk
16 ounces Gruyère, grated (about 5 cups)
12 ounces white Cheddar, grated (about 4 cups)

Preparation

1. Bring a large pot of salted water to a boil. (If you’re planning to bake the macaroni and cheese in a baking dish instead of a skillet, butter 9-by-13-inch baking dish or other 3-quart casserole.)

2. Meanwhile, in a deep, large (12-inch) ovenproof skillet, melt 2 tablespoons butter over medium-high heat. Add the onions, thyme sprigs and bay leaf, if using, and season with salt and pepper. Cover with a lid, baking sheet or foil and cook, stirring once or twice, until the onions are softened, 3 to 5 minutes.

3. Uncover and continue to cook on medium-high, stirring occasionally, until deep golden brown, 20 to 25 minutes. If the onions look dry, add a few tablespoons of water at a time to prevent them from burning, scraping up any browned bits that are stuck to the bottom of the skillet. (You will need to do this several times.)

4. While the onions are cooking, heat the oven to 450 degrees. Cook the pasta in the boiling water until 2 minutes shy of al dente; drain and set aside. Rub one side of each baguette slice with garlic.

5. When the onions are a deep golden brown, discard the thyme sprigs and bay leaf and deglaze the skillet with the vinegar until evaporated, scraping up browned bits as you go, about 30 seconds. Add the remaining 2 tablespoons butter. When melted, add the flour and cook, stirring, until the flour begins to stick to the bottom of the pan and has turned a light golden brown, about 3 minutes. Slowly whisk in the milk and season with salt and pepper. Bring to a simmer, whisking often.

6. Reserve 1 cup of the Gruyère. Carefully add the remaining Gruyère and all the Cheddar to the caramelized onion mixture and carefully stir until melted. If your pan is big enough, add the cooked pasta and stir to combine, or combine the sauce and pasta in the prepared dish.

7. Spread the pasta mixture in an even layer in the prepared dish, then top with the baguette slices, garlic-side up. Sprinkle the toasts with the reserved 1 cup Gruyère and season with pepper. Place the skillet or dish on a sheet pan and bake until bubbly and brown in spots, 10 to 15 minutes. If you like a crispier top, broil for a few minutes. Let cool slightly, then garnish with fresh thyme leaves.

Nutritional analysis per serving (8 servings): 1103 calories; 60 grams fat; 34 grams saturated fat; 0 grams trans fat; 17 grams monounsaturated fat; 3 grams polyunsaturated fat; 84 grams carbohydrates; 5 grams dietary fiber; 16 grams sugars; 57 grams protein; 1313 milligrams sodium

I had GFiber for a bit and had no issues with torrenting via private trackers and no VPN.

Score, congrats!

Yeah, if you can get the 6750 for less than a 6700 I’d go that route. Should be set for quite a while with that.

The RX6000s offer a lot of bang for the buck since AMD released their fluid motion frame generation. I’ve been using a 6600 (non-XT) at 1440p and it does surprisingly well. You sure about those prices/specs though? 6750XT for less than 6700XT? And a 6700XT with 16GB?

Crazy! Kenney makes excellent assets. Thanks for the heads up!

Put the text you want to be the link in brackets then immediately follow with the URL in parenthesis. For example [your text](https://lemmy.world) turns into your text.

Not sure if that was a typo but OP mentioned OnlyOffice, not OpenOffice. I don’t think OnlyOffice has ever tried to get me to make an account or do things on the cloud. I keep both Only and Libre installed. I like the UI of Only better, but Libre is more functional, at least as far as spreadsheets go which is my main use.

Or Nicotine+ (a great Soulseek client)

I can’t comment on questions 1, 3, and 5 but I have been using Real-Debrid for around four years now (through Kodi mostly because I don’t want to have to manage a huge server again, occasionally I download directly to watch later/on a different device/non-video stuff) and I’ve been pretty happy with them so I’ll answer from that perspective.

Quality is great. As you mentioned in Q4, it works via torrents so if a torrent exists you’re free to grab whatever you want. You can stream or download from RD once it’s been cached by them. Even 50+GB Bluray remux streams fine directly from them. As for file naming, in the thousands of downloads I’ve gone through, I think I’ve come across two incidents where something wasn’t named properly and I ended up with something I didn’t expect but I believe both of those were Kodi issues, not RD. One was a movie where I got a foreign movie of a similar name and one was a TV series where it kept trying to play the wrong season/episode. In both cases I was able to just manually add the torrent/magnet and RD had it fully downloaded basically instantly or I was able to manually select another file in Kodi. The file names are what you expect with a torrent though with the title/year and all the quality and codec info in the filename so it’s hard to get the wrong thing. I don’t think I’ve ever come across deliberately misnamed files. It would get nuked pretty fast, trackers usually take stuff like that pretty seriously.

Assuming something is relatively available RD seems to be able to grab it very quickly. Like as fast as the page refreshes after adding the torrent/magnet. You also download very quickly from them; I typically see over 100MBs down over my wireless connection in a house with several other people using our connection which is pretty much fully saturating our bandwidth lol. Occasionally I have had issues getting something, but like with most things, the older and more obscure you get the harder it is to find sources for. In that case you may want to be on certain trackers. This is kind of why I like Kodi because there are plugins that focus on different types of media and some may have better luck finding, say, old 90s cartoons while others are better for anime. Once it gets added to my debrid I can go back and grab it/rewatch later. But for more popular stuff, I typically just use one of the big name public trackers. RD grabs it and I get it securely and privately from them. I’ve never bothered with a VPN and have never had issues.

One thing that I didn’t see mentioned was downtime. Occasionally RD has had some downtime. If you’ve ever been on the addons4kodi subreddit you’ve probably seen the posts with people freaking out about it within minutes of it going down. Downtime is typically minimal and usually back up within minutes to a few hours. In a few instances (like maybe twice?) it went down for like 12 hours or longer? Not really sure, if it goes down I just find something else to do and check later in the day or the next day and it’s back up. RD has also been known to compensate days worth of service for hours of downtime which is pretty nice. I haven’t heard the same about Alldebrid or Premiumize.

RD also gives you tokens based on the service package you buy (called fidelity points). 1000 points will convert to 30 days of service. I buy 180 days at a time which is currently around $17.33 USD and I get 800 points, so buying a year (~$35) gets me an extra month with points left over. Then the next several 180 day purchases also get extra months with them.