A simple question to this community, what are you self-hosting? It’s probably fun to hear from each-other what services we are running.
Please mention at least the service (e.g. e-mail) and the software (e.g. postfix). Extra bonus points for also mentioning the OS and/or hardware (e.g. Linux Distribution, raspberry pi, etc) you are running on.
My long and mostly complete list:
These services are the result of years of development and administrating my lab and while there is still some cruft, it’s mostly services that I think have real utility.
As far as hardware:
Running pfsense on a toughbook laptop as a router-firewall.
A SuperMicro 24 bay disk-shelf with Proxmox and ZFS for NAS duties and a couple services.
Lenovo Tiny boxes with a Proxmox cluster for the majority of my local services.
Dell managed switch
A few Raspberry-pi’s with Raspbian for various things.
Linksys AP for wifi
Edit: Spelling is hard.
That is impressive. For the sake of curiosity, do you have any photos or diagrams you could share?
Hmmm. I don’t have a network/infrastructure diagram or anything yet, but I’ve been meaning to create one. I’ll probably put one together and post more about my setup if there’s any interest. I’ll be sure to tag you when I do. Thanks for the interest!
Tag me as well! I hope to have something with half the functionality of your setup by year’s end.
That was a fantastic list thank you!
Did you get a dual nic in the laptop router, or how did you work it?
It’s an older Panasonic ToughBook CF-C2 with an ExpressCard34 slot I’d say circa 2013. I have a gigabit Ethernet adapter jammed in there for WAN. I’ve been using the setup for maybe 8 years and it’s been ultra reliable for me.
Expresscards are an underrated feature of old laptops as a server.
Fantastic breakdown, thank you!
Mind blown! Thanks so much for the comprehensive list!! 🙏
Hi, would it be possible to link to the switch?
Are you concerned about how much power your hardware consumes?
I’m not sure what kind of link would be best, but sure. It’s a Dell PowerConnect-5524. Picked it up from eBay I believe maybe 6 or 7 years ago. Not a particularly great switch, but it was cheap, had plenty of expansion, and some management capabilities. Consumes more power than I’d like though (~20-25w), and doesn’t have some of the advanced capabilities of some newer switches.
For power consumption, yes. I prefer to use power efficient devices. The big standout in my lab is the NAS and Dell switch. The NAS is running very little, but still idles at ~100-110w so I’m looking at lowering that usage with a motherboard / processor swap in the future. It’s using a server board and xenon processor which aren’t really built for power efficiency. Swapping this to a recent consumer-grade board with an i3 would likely address this, but depending on chipset I’ll probably loose ECC ram compatibility. I’d like to swap the switch to a more modern microtik 10g unit I think, with a large dumb swich; but I haven’t settled on the idea for sure.
Thanks!
Hi, would it be possible to link to the switch?
Are you concerned about how much power your hardware consumes?