See, what both of you wrote is completely alien and confusing to me. The look of IPv6 gives me an aneurysm. Let me keep my IPv4. You can run IPv6 on your own LAN. I’m not stopping you.
It’s a little bit unfamiliar, not the end of the world. It’s not complicated and not as nuanced as ipv4 networking. No dhcp necessary anymore on your local network, how good is that? No more trying to hardcode MTU, no strict/open/hairpin/fullcone/etc NAT issues because no NAT, no port forwarding, no fear of IP collisions, less overhead, freedom of many public addresses per interface - host each app on its own public IP address if you desire. Ipv4 over ipv6 is part of the spec so you would never lose ipv4 connectivity. I could go on
You can statically number a LAN with fd00::/8 and NAT66 to the internet, if you really want to.
Heck you could set up a ULA or just use a range from your assigned prefix
See, what both of you wrote is completely alien and confusing to me. The look of IPv6 gives me an aneurysm. Let me keep my IPv4. You can run IPv6 on your own LAN. I’m not stopping you.
It’s a little bit unfamiliar, not the end of the world. It’s not complicated and not as nuanced as ipv4 networking. No dhcp necessary anymore on your local network, how good is that? No more trying to hardcode MTU, no strict/open/hairpin/fullcone/etc NAT issues because no NAT, no port forwarding, no fear of IP collisions, less overhead, freedom of many public addresses per interface - host each app on its own public IP address if you desire. Ipv4 over ipv6 is part of the spec so you would never lose ipv4 connectivity. I could go on
Roughly speaking, fd00::123 is the IPv6 equivalent of 192.168.0.123